Units

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 229,
    "next": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/units/?format=api&page=2",
    "previous": null,
    "results": [
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Non-visible component that can detect shaking and measure acceleration approximately in three dimensions using SI units (m/s<sup>2</sup>). The components are: <ul><li> <strong>xAccel</strong>: 0 when the phone is at rest on a flat surface, positive when the phone is tilted to the right (i.e., its left side is raised), and negative when the phone is tilted to the left (i.e., its right size is raised).</li> <li> <strong>yAccel</strong>: 0 when the phone is at rest on a flat surface, positive when its bottom is raised, and negative when its top is raised. </li> <li> <strong>zAccel</strong>: Equal to -9.8 (earth''s gravity in meters per second per second when the device is at rest parallel to the ground with the display facing up, 0 when perpendicular to the ground, and +9.8 when facing down. The value can also be affected by accelerating it with or against gravity. </li></ul>",
            "previous_source": "",
            "target": "দৃশ্যমান নয় এমন উপাদান যা SI ইউনিট (m/s<sup>2</sup>) ব্যবহার করে প্রায় তিন মাত্রায় কম্পন শনাক্ত করতে পারে এবং ত্বরণ পরিমাপ করতে পারে। উপাদানগুলি হল: <ul><li> <strong>xAccel</strong>: 0 যখন ফোনটি সমতল পৃষ্ঠে বিশ্রামে থাকে, যখন ফোনটি ডানদিকে কাত হয় তখন ইতিবাচক হয় (অর্থাৎ, এটির বাম দিকে উত্থিত হয়), এবং নেতিবাচক যখন ফোনটি বাম দিকে কাত হয় (অর্থাৎ, এর ডান আকার উত্থিত হয়)।</li> <li> <strong>yAccel</strong>: 0 যখন ফোনটি সমতল পৃষ্ঠে বিশ্রামে থাকে, তখন ইতিবাচক এটির নীচে উত্থাপিত হয়, এবং যখন শীর্ষটি উত্থাপিত হয় তখন ঋণাত্মক হয়। </li> <li> <strong>zAccel</strong>: -9.8 এর সমান (পৃথিবীর মাধ্যাকর্ষণ মিটার প্রতি সেকেন্ডে সেকেন্ডে যখন ডিভাইসটি মাটির সমান্তরালে বিশ্রামে থাকে এবং ডিসপ্লেটি উপরের দিকে থাকে, তখন 0 মাটিতে লম্ব, এবং নিচের দিকে মুখ করার সময় +9.8। মানটি অভিকর্ষের সাথে বা বিপরীতে এটিকে ত্বরান্বিত করেও প্রভাবিত হতে পারে। </li></ul>",
            "id_hash": 6400886998768359893,
            "content_hash": 3305070602576274360,
            "location": "",
            "context": "AccelerometerSensorHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 1,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 144,
            "priority": 100,
            "id": 221901,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=d8d484cfe10119d5",
            "url": "https://weblate.appinventor.mit.edu/api/units/221901/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10722/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A component that can launch an activity using the <code>StartActivity</code> method. <p>Activities that can be launched include:<ul> <li> Starting another App Inventor for Android app. To do so, first find out the <em>class</em> of the other application by downloading the source code and using a file explorer or unzip utility to find a file named \"youngandroidproject/project.properties\". The first line of the file will start with \"main=\" and be followed by the class name; for example, <code>main=com.gmail.Bitdiddle.Ben.HelloPurr.Screen1</code>. (The first components indicate that it was created by Ben.Bitdiddle",
            "previous_source": "",
            "target": "",
            "id_hash": -6655185969608387764,
            "content_hash": -7918337812925819732,
            "location": "",
            "context": "ActivityStarterHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 2,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 221902,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=23a4079f0f54134c",
            "url": "https://weblate.appinventor.mit.edu/api/units/221902/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10723/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A component that contains anomaly detection models",
            "previous_source": "",
            "target": "",
            "id_hash": 7171671276814156282,
            "content_hash": 6844281919820050944,
            "location": "",
            "context": "AnomalyDetectionHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 3,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 7,
            "priority": 100,
            "id": 221903,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=e386e507746141fa",
            "url": "https://weblate.appinventor.mit.edu/api/units/221903/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10724/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "<p>A round ''sprite'' that can be placed on a <code>Canvas</code>, where it can react to touches and drags, interact with other sprites (<code>ImageSprite</code>s and other <code>Ball</code>s) and the edge of the Canvas, and move according to its property values.</p><p>For example, to have a <code>Ball</code> move 4 pixels toward the top of a <code>Canvas</code> every 500 milliseconds (half second), you would set the <code>Speed</code> property to 4 [pixels], the <code>Interval</code> property to 500 [milliseconds], the <code>Heading</code> property to 90 [degrees], and the <code>Enabled</code> property to <code>True</code>.</p><p>The difference between a <code>Ball</code> and an <code>ImageSprite</code> is that the latter can get its appearance from an image file, while a <code>Ball</code>''s appearance can be changed only by varying its <code>PaintColor</code> and <code>Radius</code> properties.</p>",
            "previous_source": "",
            "target": "",
            "id_hash": 7449823071733847299,
            "content_hash": -6909237758358581611,
            "location": "",
            "context": "BallHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 4,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 119,
            "priority": 100,
            "id": 221904,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=e763169ce6349503",
            "url": "https://weblate.appinventor.mit.edu/api/units/221904/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10725/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Component for using the Barcode Scanner to read a barcode",
            "previous_source": "",
            "target": "",
            "id_hash": 8772586106945962968,
            "content_hash": -5104959584847873566,
            "location": "",
            "context": "BarcodeScannerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 5,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 221905,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=f9be7c95ca0a83d8",
            "url": "https://weblate.appinventor.mit.edu/api/units/221905/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10726/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A sensor component that can measure the ambient air pressure.",
            "previous_source": "",
            "target": "",
            "id_hash": 8488559212697330255,
            "content_hash": 3604034534974326910,
            "location": "",
            "context": "BarometerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 6,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 221906,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=f5cd6ba12fb1a24f",
            "url": "https://weblate.appinventor.mit.edu/api/units/221906/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10727/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Bluetooth client component",
            "previous_source": "",
            "target": "",
            "id_hash": 6177559951036237980,
            "content_hash": 869985933288712069,
            "location": "",
            "context": "BluetoothClientHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 7,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 221907,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=d5bb1a0b9c31c89c",
            "url": "https://weblate.appinventor.mit.edu/api/units/221907/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10728/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Bluetooth server component",
            "previous_source": "",
            "target": "",
            "id_hash": -2200180887099417300,
            "content_hash": 5774648998924476491,
            "location": "",
            "context": "BluetoothServerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 8,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 221908,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=61776323e6d5dd2c",
            "url": "https://weblate.appinventor.mit.edu/api/units/221908/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10729/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Button with the ability to detect clicks. Many aspects of its appearance can be changed, as well as whether it is clickable (<code>Enabled</code>), can be changed in the Designer or in the Blocks Editor.",
            "previous_source": "",
            "target": "",
            "id_hash": 6461992075833696453,
            "content_hash": 8387797218365159273,
            "location": "",
            "context": "ButtonHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 9,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 34,
            "priority": 100,
            "id": 221909,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=d9ad9b8e4d74e0c5",
            "url": "https://weblate.appinventor.mit.edu/api/units/221909/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10730/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A component to record a video using the device''s camcorder.After the video is recorded, the name of the file on the phone containing the clip is available as an argument to the AfterRecording event. The file name can be used, for example, to set the source property of a VideoPlayer component.",
            "previous_source": "",
            "target": "",
            "id_hash": -5641026152139572246,
            "content_hash": -472775318287492262,
            "location": "",
            "context": "CamcorderHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 10,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 51,
            "priority": 100,
            "id": 221910,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=31b70c9a21083bea",
            "url": "https://weblate.appinventor.mit.edu/api/units/221910/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10731/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A component to take a picture using the device''s camera. After the picture is taken, the name of the file on the phone containing the picture is available as an argument to the AfterPicture event. The file name can be used, for example, to set the Picture property of an Image component.",
            "previous_source": "",
            "target": "",
            "id_hash": -5308379892507073834,
            "content_hash": -5904074541193820179,
            "location": "",
            "context": "CameraHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 11,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 52,
            "priority": 100,
            "id": 221911,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=3654d89cde4a22d6",
            "url": "https://weblate.appinventor.mit.edu/api/units/221911/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10732/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "<p>A two-dimensional touch-sensitive rectangular panel on which drawing can be done and sprites can be moved.</p> <p>The <code>BackgroundColor</code>, <code>PaintColor</code>, <code>BackgroundImage</code>, <code>Width</code>, and <code>Height</code> of the Canvas can be set in either the Designer or in the Blocks Editor. The <code>Width</code> and <code>Height</code> are measured in pixels and must be positive.</p><p>Any location on the Canvas can be specified as a pair of (X, Y) values, where <ul> <li>X is the number of pixels away from the left edge of the Canvas</li><li>Y is the number of pixels away from the top edge of the Canvas</li></ul>.</p> <p>There are events to tell when and where a Canvas has been touched or a <code>Sprite</code> (<code>ImageSprite</code> or <code>Ball</code>) has been dragged. There are also methods for drawing points, lines, and circles.</p>",
            "previous_source": "",
            "target": "",
            "id_hash": 1177868880879766378,
            "content_hash": 1721160815748715850,
            "location": "",
            "context": "CanvasHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 12,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 125,
            "priority": 100,
            "id": 221912,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=9058a181acd34b6a",
            "url": "https://weblate.appinventor.mit.edu/api/units/221912/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10733/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A component that holds (x, y)-coordinate based data",
            "previous_source": "",
            "target": "",
            "id_hash": 989492509479085622,
            "content_hash": 2698250035751714163,
            "location": "",
            "context": "ChartData2DHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 13,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "priority": 100,
            "id": 221913,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=8dbb6231df692636",
            "url": "https://weblate.appinventor.mit.edu/api/units/221913/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10734/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A component that allows visualizing data",
            "previous_source": "",
            "target": "",
            "id_hash": 6053375743524776466,
            "content_hash": 3285669990024049936,
            "location": "",
            "context": "ChartHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 14,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 6,
            "priority": 100,
            "id": 221914,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=d401e92aa4c2aa12",
            "url": "https://weblate.appinventor.mit.edu/api/units/221914/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10735/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A Non-visible component for communicating with an AI chat bot. This component currently communicates with a proxy run by MIT which in turn uses OpenAI''s ChatGPT API. This component is considered experimental.",
            "previous_source": "",
            "target": "",
            "id_hash": -3196916305075924341,
            "content_hash": 694122557216736022,
            "location": "",
            "context": "ChatBotHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 15,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 32,
            "priority": 100,
            "id": 221915,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=53a2458efb4b928b",
            "url": "https://weblate.appinventor.mit.edu/api/units/221915/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10736/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Checkbox that raises an event when the user clicks on it. There are many properties affecting its appearance that can be set in the Designer or Blocks Editor.",
            "previous_source": "",
            "target": "",
            "id_hash": 5560284663907163902,
            "content_hash": 7971632595561986638,
            "location": "",
            "context": "CheckBoxHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 16,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 28,
            "priority": 100,
            "id": 221916,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=cd2a1971323d1efe",
            "url": "https://weblate.appinventor.mit.edu/api/units/221916/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10737/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Circle",
            "previous_source": "",
            "target": "",
            "id_hash": -8241033178070520605,
            "content_hash": -5621843235106276343,
            "location": "",
            "context": "CircleHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 17,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 1,
            "priority": 100,
            "id": 221917,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=da1f7fcc6e5ece3",
            "url": "https://weblate.appinventor.mit.edu/api/units/221917/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10738/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "A visible component that indicates the progress of an operation using an animated loop.",
            "previous_source": "",
            "target": "",
            "id_hash": 4018990341327290276,
            "content_hash": 2508060161421114012,
            "location": "",
            "context": "CircularProgressHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 18,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 14,
            "priority": 100,
            "id": 221918,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=b7c6526c0289ffa4",
            "url": "https://weblate.appinventor.mit.edu/api/units/221918/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10739/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "<p>Non-visible component that provides the instant in time using the internal clock on the phone. It can fire a timer at regularly set intervals and perform time calculations, manipulations, and conversions.</p> <p>Methods to convert an instant to text are also available. Acceptable patterns are empty string, MM/DD/YYYY HH:mm:ss a, or MMM d, yyyyHH:mm. The empty string will provide the default format, which is \"MMM d, yyyy HH:mm:ss a\" for FormatDateTime \"MMM d, yyyy\" for FormatDate. To see all possible format, please see <a href=\"https://docs.oracle.com/javase/7/docs/api/java/text/SimpleDateFormat.html\" _target=\"_blank\">here</a>. </p>",
            "previous_source": "",
            "target": "",
            "id_hash": -4868466836496991434,
            "content_hash": -3555294182401965358,
            "location": "",
            "context": "ClockHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 19,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 221919,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=3c6fbb34d9d3bb36",
            "url": "https://weblate.appinventor.mit.edu/api/units/221919/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10740/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/bn_BD/?format=api",
            "source": "Non-visible component allowing you to store data on a Internet connected database server (using Redis software). This allows the users of your App to share data with each other. By default data will be stored in a server maintained by MIT, however you can setup and run your own server. Set the \"RedisServer\" property and \"RedisPort\" Property to access your own server.",
            "previous_source": "",
            "target": "",
            "id_hash": 3854779907392159322,
            "content_hash": -521349578889813530,
            "location": "",
            "context": "CloudDBHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 20,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 62,
            "priority": 100,
            "id": 221920,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/bn_BD/?checksum=b57eede6fb6c3e5a",
            "url": "https://weblate.appinventor.mit.edu/api/units/221920/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10741/?format=api"
        }
    ]
}