Units

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 229,
    "next": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/units/?format=api&page=2",
    "previous": null,
    "results": [
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Non-visible component that can detect shaking and measure acceleration approximately in three dimensions using SI units (m/s<sup>2</sup>). The components are: <ul><li> <strong>xAccel</strong>: 0 when the phone is at rest on a flat surface, positive when the phone is tilted to the right (i.e., its left side is raised), and negative when the phone is tilted to the left (i.e., its right size is raised).</li> <li> <strong>yAccel</strong>: 0 when the phone is at rest on a flat surface, positive when its bottom is raised, and negative when its top is raised. </li> <li> <strong>zAccel</strong>: Equal to -9.8 (earth''s gravity in meters per second per second when the device is at rest parallel to the ground with the display facing up, 0 when perpendicular to the ground, and +9.8 when facing down. The value can also be affected by accelerating it with or against gravity. </li></ul>",
            "previous_source": "",
            "target": "Component no visible que pot detectar un sacseig i mesurar l''acceleració aproximada en tres dimensions en unitats del SI (m/s<sup>2</sup>). Els components són: <ul><li> <strong>Acceleració x</strong>: 0 quan el mòbil es troba en repòs sobre una superfície plana, positiu quan el mòbil està inclinat cap a la dreta (és a dir, la part esquerra està elevada), i negatiu quan el mòbil està inclinat cap a l''esquerra (és a dir, la part dreta està elevada).</li> <li> <strong>Acceleració y</strong>: 0 quan el mòbil es troba en repòs sobre una superfície plana, positiva quan la seva part inferior està elevada, i negatiu quan la seva part superior està elevada. </li> <li> <strong>Acceleració z</strong>: Igual a -9.8 (gravetat de la Terra en metres per segon al quadrat) quan el mòbil està en repòs en paral·lel al terra amb la pantalla cap amunt, 0 quan està perpendicular al terra, i +9.8 quan té la pantalla cap avall. El valor es pot veure afectat per acceleracions a favor o en contra de la gravetat. </li></ul>",
            "id_hash": 6400886998768359893,
            "content_hash": 3305070602576274360,
            "location": "",
            "context": "AccelerometerSensorHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 1,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 144,
            "priority": 100,
            "id": 222130,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=d8d484cfe10119d5",
            "url": "https://weblate.appinventor.mit.edu/api/units/222130/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10722/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A component that can launch an activity using the <code>StartActivity</code> method. <p>Activities that can be launched include:<ul> <li> Starting another App Inventor for Android app. To do so, first find out the <em>class</em> of the other application by downloading the source code and using a file explorer or unzip utility to find a file named \"youngandroidproject/project.properties\". The first line of the file will start with \"main=\" and be followed by the class name; for example, <code>main=com.gmail.Bitdiddle.Ben.HelloPurr.Screen1</code>. (The first components indicate that it was created by Ben.Bitdiddle",
            "previous_source": "",
            "target": "Un component que pot iniciar una activitat amb el mètode <code>Inicia activitat</code>. <p>En particular, es poden iniciar altres apps fetes amb App Inventor. Per fer-ho, primer cal esbrinar la <em>classe</em> de l''altra aplicació descarregant el fitxer de projecte i utilitzant un explorador de fitxers que pugui descomprimir fitxers zip. Dins del fitxer comprimit hi ha un fitxer anomenat \"youngandroidproject/project.properties\". La primera línia del fitxer comença amb \"main=\" i, a continuació, el nom de la classe; per exemple, <code>main=com.gmail.Bitdiddle.Ben.HelloPurr.Screen1</code>. (La primera part indica que va ser creada per Ben.Bitdiddle).",
            "id_hash": -6655185969608387764,
            "content_hash": -7918337812925819732,
            "location": "",
            "context": "ActivityStarterHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 2,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 222131,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=23a4079f0f54134c",
            "url": "https://weblate.appinventor.mit.edu/api/units/222131/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10723/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A component that contains anomaly detection models",
            "previous_source": "",
            "target": "Un component que conté models de detecció d''anomalies.",
            "id_hash": 7171671276814156282,
            "content_hash": 6844281919820050944,
            "location": "",
            "context": "AnomalyDetectionHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 3,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 7,
            "priority": 100,
            "id": 222132,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=e386e507746141fa",
            "url": "https://weblate.appinventor.mit.edu/api/units/222132/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10724/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "<p>A round ''sprite'' that can be placed on a <code>Canvas</code>, where it can react to touches and drags, interact with other sprites (<code>ImageSprite</code>s and other <code>Ball</code>s) and the edge of the Canvas, and move according to its property values.</p><p>For example, to have a <code>Ball</code> move 4 pixels toward the top of a <code>Canvas</code> every 500 milliseconds (half second), you would set the <code>Speed</code> property to 4 [pixels], the <code>Interval</code> property to 500 [milliseconds], the <code>Heading</code> property to 90 [degrees], and the <code>Enabled</code> property to <code>True</code>.</p><p>The difference between a <code>Ball</code> and an <code>ImageSprite</code> is that the latter can get its appearance from an image file, while a <code>Ball</code>''s appearance can be changed only by varying its <code>PaintColor</code> and <code>Radius</code> properties.</p>",
            "previous_source": "",
            "target": "<p>Un component animat en forma de cercle que es pot situar en un <code>Llenç</code>, on pot reaccionar a tocs i arrossegaments, interactuar amb altres components animats (<code>icones animades</code>, i altres <code>boles</code>) i amb la vora del Llenç, i es mou segons indiquen les seves propietats.</p><p>Per exemple, per moure una <code>Bola</code> 4 píxels cap a la part superior d''un <code>Llenç</code> cada 500 mil·lisegons (mig segon), s''hauria d''assignar a la propietat <code>Velocitat</code> el valor 4 [píxels], a la propietat <code>Interval</code> el valor 500 [mil·lisegons], a la propietat <code>Direcció</code> el valor 90 [graus] i a la propietat <code>Habilitat</code> el valor <code>cert</code>.</p><p>La diferència entre una <code>Bola</code> i una <code>Icona animada</code> és que l''aparença de la Icona animada s''obté a partir d''un fitxer d''imatge, mentre que una <code>Bola</code> només pot canviar la seva aparença mitjançant les propietats <code>Color</code> i <code>Radi</code>.</p>",
            "id_hash": 7449823071733847299,
            "content_hash": -6909237758358581611,
            "location": "",
            "context": "BallHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 4,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 119,
            "priority": 100,
            "id": 222133,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=e763169ce6349503",
            "url": "https://weblate.appinventor.mit.edu/api/units/222133/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10725/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Component for using the Barcode Scanner to read a barcode",
            "previous_source": "",
            "target": "Component per utilitzar l''escàner de codis per llegir un codi QR.",
            "id_hash": 8772586106945962968,
            "content_hash": -5104959584847873566,
            "location": "",
            "context": "BarcodeScannerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 5,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 222134,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=f9be7c95ca0a83d8",
            "url": "https://weblate.appinventor.mit.edu/api/units/222134/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10726/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A sensor component that can measure the ambient air pressure.",
            "previous_source": "",
            "target": "Un component que pot mesurar la pressió de l''aire.",
            "id_hash": 8488559212697330255,
            "content_hash": 3604034534974326910,
            "location": "",
            "context": "BarometerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 6,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 222135,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=f5cd6ba12fb1a24f",
            "url": "https://weblate.appinventor.mit.edu/api/units/222135/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10727/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Bluetooth client component",
            "previous_source": "",
            "target": "Component Client Bluetooth",
            "id_hash": 6177559951036237980,
            "content_hash": 869985933288712069,
            "location": "",
            "context": "BluetoothClientHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 7,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 222136,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=d5bb1a0b9c31c89c",
            "url": "https://weblate.appinventor.mit.edu/api/units/222136/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10728/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Bluetooth server component",
            "previous_source": "",
            "target": "Component Servidor Bluetooth",
            "id_hash": -2200180887099417300,
            "content_hash": 5774648998924476491,
            "location": "",
            "context": "BluetoothServerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 8,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 222137,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=61776323e6d5dd2c",
            "url": "https://weblate.appinventor.mit.edu/api/units/222137/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10729/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Button with the ability to detect clicks. Many aspects of its appearance can be changed, as well as whether it is clickable (<code>Enabled</code>), can be changed in the Designer or in the Blocks Editor.",
            "previous_source": "",
            "target": "Botó amb la capacitat de detectar clics. Es poden canviar molts aspectes de la seva aparença, com si s''hi pot fer clic (<code>Habilitat</code>), en el Dissenyador o en l''Editor de blocs.",
            "id_hash": 6461992075833696453,
            "content_hash": 8387797218365159273,
            "location": "",
            "context": "ButtonHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 9,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 34,
            "priority": 100,
            "id": 222138,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=d9ad9b8e4d74e0c5",
            "url": "https://weblate.appinventor.mit.edu/api/units/222138/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10730/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A component to record a video using the device''s camcorder.After the video is recorded, the name of the file on the phone containing the clip is available as an argument to the AfterRecording event. The file name can be used, for example, to set the source property of a VideoPlayer component.",
            "previous_source": "",
            "target": "Un component per enregistrar vídeos utilitzant la càmera de vídeo del dispositiu. Quan s''ha enregistrat un vídeo, el nom del fitxer en el mòbil està disponible com a argument de l''esdeveniment Després d''enregistrar. El nom del fitxer es pot utilitzar, per exemple, per assignar la propietat Origen d''un component Reproductor de vídeo.",
            "id_hash": -5641026152139572246,
            "content_hash": -472775318287492262,
            "location": "",
            "context": "CamcorderHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 10,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 51,
            "priority": 100,
            "id": 222139,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=31b70c9a21083bea",
            "url": "https://weblate.appinventor.mit.edu/api/units/222139/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10731/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A component to take a picture using the device''s camera. After the picture is taken, the name of the file on the phone containing the picture is available as an argument to the AfterPicture event. The file name can be used, for example, to set the Picture property of an Image component.",
            "previous_source": "",
            "target": "Un component per fer una foto amb la càmera del dispositiu. Un cop s''ha fet la foto, el nom del fitxer que conté la imatge és disponible com a argument de l''esdeveniment Després de fer foto. El nom del fitxer es pot utilitzar, per exemple, per assignar la propietat Imatge d''un component Imatge.",
            "id_hash": -5308379892507073834,
            "content_hash": -5904074541193820179,
            "location": "",
            "context": "CameraHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 11,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 52,
            "priority": 100,
            "id": 222140,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=3654d89cde4a22d6",
            "url": "https://weblate.appinventor.mit.edu/api/units/222140/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10732/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "<p>A two-dimensional touch-sensitive rectangular panel on which drawing can be done and sprites can be moved.</p> <p>The <code>BackgroundColor</code>, <code>PaintColor</code>, <code>BackgroundImage</code>, <code>Width</code>, and <code>Height</code> of the Canvas can be set in either the Designer or in the Blocks Editor. The <code>Width</code> and <code>Height</code> are measured in pixels and must be positive.</p><p>Any location on the Canvas can be specified as a pair of (X, Y) values, where <ul> <li>X is the number of pixels away from the left edge of the Canvas</li><li>Y is the number of pixels away from the top edge of the Canvas</li></ul>.</p> <p>There are events to tell when and where a Canvas has been touched or a <code>Sprite</code> (<code>ImageSprite</code> or <code>Ball</code>) has been dragged. There are also methods for drawing points, lines, and circles.</p>",
            "previous_source": "",
            "target": "<p>Un rectangle sensible al tacte on es pot dibuixar i situar components animats.</p> <p>Les propietats <code>Color de fons</code>, <code>Color</code>, <code>Imatge de fons</code>, <code>Amplada</code> i <code>Alçada</code> del Llenç es poden assignar des del Dissenyador o des de l''Editor de blocs. L'' <code>Amplada</code> i l''<code>Alçada</code> es mesuren en píxels i han de tenir valors positius.</p><p>Qualsevol punt del Llenç es pot indicar com a parella de valors (X, Y) , on <ul> <li>X és el nombre de píxels de distància des de la vora esquerra del Llenç</li><li>Y és el nombre de píxels de distància des de la vora superior del Llenç</li></ul>.</p> <p>Hi ha esdeveniments per saber quan i on s''ha tocat un Llenç o quan i on s''ha arrossegat un component animat (<code>Icona animada</code> o <code>Bola</code>). També hi ha mètodes per dibuixar punts i traçar línies i cercles.</p>",
            "id_hash": 1177868880879766378,
            "content_hash": 1721160815748715850,
            "location": "",
            "context": "CanvasHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 12,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 125,
            "priority": 100,
            "id": 222141,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=9058a181acd34b6a",
            "url": "https://weblate.appinventor.mit.edu/api/units/222141/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10733/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A component that holds (x, y)-coordinate based data",
            "previous_source": "",
            "target": "Un component que conté dades en forma de coordenades (x,y).",
            "id_hash": 989492509479085622,
            "content_hash": 2698250035751714163,
            "location": "",
            "context": "ChartData2DHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 13,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "priority": 100,
            "id": 222142,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=8dbb6231df692636",
            "url": "https://weblate.appinventor.mit.edu/api/units/222142/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10734/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A component that allows visualizing data",
            "previous_source": "",
            "target": "Un component que permet visualitzar dades.",
            "id_hash": 6053375743524776466,
            "content_hash": 3285669990024049936,
            "location": "",
            "context": "ChartHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 14,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 6,
            "priority": 100,
            "id": 222143,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=d401e92aa4c2aa12",
            "url": "https://weblate.appinventor.mit.edu/api/units/222143/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10735/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A Non-visible component for communicating with an AI chat bot. This component currently communicates with a proxy run by MIT which in turn uses OpenAI''s ChatGPT API. This component is considered experimental.",
            "previous_source": "",
            "target": "Un component no visible per comunicar-se amb un bot de conversa AI. Actualment, aquest component es comunica amb un proxy del MIT que utilitza l''API ChatGPT d''OpenAI. Aquest component és experimental.",
            "id_hash": -3196916305075924341,
            "content_hash": 694122557216736022,
            "location": "",
            "context": "ChatBotHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 15,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 32,
            "priority": 100,
            "id": 222144,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=53a2458efb4b928b",
            "url": "https://weblate.appinventor.mit.edu/api/units/222144/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10736/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Checkbox that raises an event when the user clicks on it. There are many properties affecting its appearance that can be set in the Designer or Blocks Editor.",
            "previous_source": "",
            "target": "Casella de selecció que produeix un esdeveniment quan l''usuari hi fa clic. Hi ha moltes propietats que afecten la seva aparença, i es poden establir en el Dissenyador o en l''Editor de blocs.",
            "id_hash": 5560284663907163902,
            "content_hash": 7971632595561986638,
            "location": "",
            "context": "CheckBoxHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 16,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 28,
            "priority": 100,
            "id": 222145,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=cd2a1971323d1efe",
            "url": "https://weblate.appinventor.mit.edu/api/units/222145/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10737/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Circle",
            "previous_source": "",
            "target": "Cercle",
            "id_hash": -8241033178070520605,
            "content_hash": -5621843235106276343,
            "location": "",
            "context": "CircleHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 17,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 1,
            "priority": 100,
            "id": 222146,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=da1f7fcc6e5ece3",
            "url": "https://weblate.appinventor.mit.edu/api/units/222146/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10738/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "A visible component that indicates the progress of an operation using an animated loop.",
            "previous_source": "",
            "target": "Un component visible que indica el progrés d''una operació mitjançant un cercle animat.",
            "id_hash": 4018990341327290276,
            "content_hash": 2508060161421114012,
            "location": "",
            "context": "CircularProgressHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 18,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 14,
            "priority": 100,
            "id": 222147,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=b7c6526c0289ffa4",
            "url": "https://weblate.appinventor.mit.edu/api/units/222147/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10739/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "<p>Non-visible component that provides the instant in time using the internal clock on the phone. It can fire a timer at regularly set intervals and perform time calculations, manipulations, and conversions.</p> <p>Methods to convert an instant to text are also available. Acceptable patterns are empty string, MM/DD/YYYY HH:mm:ss a, or MMM d, yyyyHH:mm. The empty string will provide the default format, which is \"MMM d, yyyy HH:mm:ss a\" for FormatDateTime \"MMM d, yyyy\" for FormatDate. To see all possible format, please see <a href=\"https://docs.oracle.com/javase/7/docs/api/java/text/SimpleDateFormat.html\" _target=\"_blank\">here</a>. </p>",
            "previous_source": "",
            "target": "<p>Component no visible que retorna l''instant actual mitjançant el rellotge intern del mòbil. Pot disparar un temporitzador a intervals establerts i realitzar càlculs, manipulacions i conversions de temps.</p> <p>També hi ha mètodes per convertir un instant en un text . Els formats admesos són un text buit, MM/DD/YYYY HH:mm:ss a o MMM d, yyyyHH:mm. El text buit correspon al format predeterminat, que és \"MMM d, yyyy HH:mm:ss a\" per a Aplica fomat a dia i hora i \"MMM d, yyyy\" per Aplica format a hora. Per veure tots els format possibles, consulta la documentació <a href=\"https://docs.oracle.com/javase/7/docs/api/java/text/SimpleDateFormat.html\" _target=\"_blank\">aquí</a>. </p>",
            "id_hash": -4868466836496991434,
            "content_hash": -3555294182401965358,
            "location": "",
            "context": "ClockHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 19,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 222148,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=3c6fbb34d9d3bb36",
            "url": "https://weblate.appinventor.mit.edu/api/units/222148/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10740/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/ca/?format=api",
            "source": "Non-visible component allowing you to store data on a Internet connected database server (using Redis software). This allows the users of your App to share data with each other. By default data will be stored in a server maintained by MIT, however you can setup and run your own server. Set the \"RedisServer\" property and \"RedisPort\" Property to access your own server.",
            "previous_source": "",
            "target": "Component no visible que permet emmagatzemar dades en un servidor de base de dades (amb programari Redis). Això permet als usuaris de l''app compartir dades entre ells. De forma predeterminada les dades s''emmagatzemen en un servidor mantingut pel MIT, però pots configurar i utilitzar el teu propi servidor. Assigna les propietats Servidor Redis i Port Redis per accedir al teu servidor.",
            "id_hash": 3854779907392159322,
            "content_hash": -521349578889813530,
            "location": "",
            "context": "CloudDBHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 20,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 62,
            "priority": 100,
            "id": 222149,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/ca/?checksum=b57eede6fb6c3e5a",
            "url": "https://weblate.appinventor.mit.edu/api/units/222149/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10741/?format=api"
        }
    ]
}