Units

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 229,
    "next": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/units/?format=api&page=2",
    "previous": null,
    "results": [
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Non-visible component that can detect shaking and measure acceleration approximately in three dimensions using SI units (m/s<sup>2</sup>). The components are: <ul><li> <strong>xAccel</strong>: 0 when the phone is at rest on a flat surface, positive when the phone is tilted to the right (i.e., its left side is raised), and negative when the phone is tilted to the left (i.e., its right size is raised).</li> <li> <strong>yAccel</strong>: 0 when the phone is at rest on a flat surface, positive when its bottom is raised, and negative when its top is raised. </li> <li> <strong>zAccel</strong>: Equal to -9.8 (earth''s gravity in meters per second per second when the device is at rest parallel to the ground with the display facing up, 0 when perpendicular to the ground, and +9.8 when facing down. The value can also be affected by accelerating it with or against gravity. </li></ul>",
            "previous_source": "",
            "target": "Nicht sichtbare Komponente, die Schütteln erkennen und Beschleunigungen in drei Richtungen näherungsweise messen kann (m/s<sup>2</sup>).  Die Komponenten sind: <ul>\n<li> <strong>xBeschl</strong>: Der Wert ist gleich 0, wenn das Handy ruhig auf einer ebenen Fläche liegt, größer 0, wenn das Handy nach rechts geneigt ist (d.h., seine linke Seite ist angehoben) und kleiner 0, wenn das Handy nach links geneigt ist (d.h., seine rechte Seite ist angehoben).</li>\n <li> <strong>yBeschl</strong>: Der Wert ist gleich 0, wenn das Handy ruhig auf einer ebenen Fläche liegt, größer 0,  wenn seine Unterkante angehoben wird und kleiner 0, wenn seine Oberkante angehoben wird.</li>\n <li> <strong>zBeschl</strong>: Der Wert ist gleich -9.8 (Erdbeschleunigung in Meter pro Quadratsekunde), wenn das Gerät mit dem Display nach oben zeigt, parallel zum Boden ist und sich in Ruhe befindet, 0, wenn das Gerät senkrecht zum Boden steht und +9.8, wenn das Display nach unten zeigt. Der Wert kann durch Beschleunigungen gegen oder mit der Schwerkraft beeinflusst werden. </li></ul>",
            "id_hash": 6400886998768359893,
            "content_hash": 3305070602576274360,
            "location": "",
            "context": "AccelerometerSensorHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 1,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 144,
            "priority": 100,
            "id": 222588,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=d8d484cfe10119d5",
            "url": "https://weblate.appinventor.mit.edu/api/units/222588/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10722/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A component that can launch an activity using the <code>StartActivity</code> method. <p>Activities that can be launched include:<ul> <li> Starting another App Inventor for Android app. To do so, first find out the <em>class</em> of the other application by downloading the source code and using a file explorer or unzip utility to find a file named \"youngandroidproject/project.properties\". The first line of the file will start with \"main=\" and be followed by the class name; for example, <code>main=com.gmail.Bitdiddle.Ben.HelloPurr.Screen1</code>. (The first components indicate that it was created by Ben.Bitdiddle",
            "previous_source": "",
            "target": "Eine Komponente, die eine Aktivität durch die Methode <code>StartActivity</code> starten kann.<p>Beispiele für Aktivitäten, die gestartet werden können: <ul> \n<li> Starten von anderen App Inventor Android Apps </li> \n<li> Aufruf der Kamera-App </li> \n<li> Durchführung einer Web-Suche </li> \n<li> Öffnen eines Web-Browsers für eine bestimmte Webseite</li> \n<li> Öffnen einer Karten-App für eine bestimmte Position</li></ul> \nSie können auch Aktivitäten starten, die Textdaten zurückliefern.  Beispiele für die Verwendung des Aktionsstarters finden Sie in der Dokumentation.</p>",
            "id_hash": -6655185969608387764,
            "content_hash": -7918337812925819732,
            "location": "",
            "context": "ActivityStarterHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 2,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 222589,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=23a4079f0f54134c",
            "url": "https://weblate.appinventor.mit.edu/api/units/222589/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10723/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A component that contains anomaly detection models",
            "previous_source": "",
            "target": "",
            "id_hash": 7171671276814156282,
            "content_hash": 6844281919820050944,
            "location": "",
            "context": "AnomalyDetectionHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 3,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 7,
            "priority": 100,
            "id": 222590,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=e386e507746141fa",
            "url": "https://weblate.appinventor.mit.edu/api/units/222590/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10724/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "<p>A round ''sprite'' that can be placed on a <code>Canvas</code>, where it can react to touches and drags, interact with other sprites (<code>ImageSprite</code>s and other <code>Ball</code>s) and the edge of the Canvas, and move according to its property values.</p><p>For example, to have a <code>Ball</code> move 4 pixels toward the top of a <code>Canvas</code> every 500 milliseconds (half second), you would set the <code>Speed</code> property to 4 [pixels], the <code>Interval</code> property to 500 [milliseconds], the <code>Heading</code> property to 90 [degrees], and the <code>Enabled</code> property to <code>True</code>.</p><p>The difference between a <code>Ball</code> and an <code>ImageSprite</code> is that the latter can get its appearance from an image file, while a <code>Ball</code>''s appearance can be changed only by varying its <code>PaintColor</code> and <code>Radius</code> properties.</p>",
            "previous_source": "",
            "target": "<p>Ein rundes \"Sprite\", das auf einer <code>Leinwand</code> plaziert werden kann, auf der es auf Berührungen und Zug, mit anderen Sprites (<code>BildSprite</code>s und andere <code>Bälle</code>) und den Rändern der Leinwand interagieren sowie sich entsprechend seiner Eigenschaftswerte bewegen kann.</p><p>Um zum Beispiel einen <code>Ball</code> alle 500 Millisekunden (jede halbe Sekunde) auf einer <code>Leinwand</code> 4 Pixel nach oben zu bewegen, würden Sie die Eigenschaft <code>Geschwindigkeit</code> auf 4 [Pixel] setzen, die Eigenschaft <code>Intervall</code> auf 500 [Millisekunden], die Eigenschaft <code>Richtung</code> auf 90 [Grad Degree] und die Eigenschaft <code>Aktiv</code> auf <code>Wahr</code>.  Diese und andere Eigenschaften können jederzeit geändert werden.</p><p>Der Unterschied zwischen einem Ball und einem <code>BildSprite</code> ist, dass Letzteres sein Aussehen aus einer Bilddatei bezieht, während das Aussehen des Balls nur durch Änderung seiner <code>Zeichenfarbe</code> und seines <code>Radius</code> möglich ist.</p>",
            "id_hash": 7449823071733847299,
            "content_hash": -6909237758358581611,
            "location": "",
            "context": "BallHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 4,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": true,
            "num_words": 119,
            "priority": 100,
            "id": 222591,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=e763169ce6349503",
            "url": "https://weblate.appinventor.mit.edu/api/units/222591/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10725/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Component for using the Barcode Scanner to read a barcode",
            "previous_source": "",
            "target": "Komponente zur Verwendung des Barcode-Scanners um einen Barcode einzulesen",
            "id_hash": 8772586106945962968,
            "content_hash": -5104959584847873566,
            "location": "",
            "context": "BarcodeScannerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 5,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 222592,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=f9be7c95ca0a83d8",
            "url": "https://weblate.appinventor.mit.edu/api/units/222592/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10726/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A sensor component that can measure the ambient air pressure.",
            "previous_source": "",
            "target": "",
            "id_hash": 8488559212697330255,
            "content_hash": 3604034534974326910,
            "location": "",
            "context": "BarometerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 6,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 222593,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=f5cd6ba12fb1a24f",
            "url": "https://weblate.appinventor.mit.edu/api/units/222593/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10727/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Bluetooth client component",
            "previous_source": "",
            "target": "Bluetooth Client Komponente",
            "id_hash": 6177559951036237980,
            "content_hash": 869985933288712069,
            "location": "",
            "context": "BluetoothClientHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 7,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 222594,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=d5bb1a0b9c31c89c",
            "url": "https://weblate.appinventor.mit.edu/api/units/222594/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10728/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Bluetooth server component",
            "previous_source": "",
            "target": "Bluetooth Server Komponente",
            "id_hash": -2200180887099417300,
            "content_hash": 5774648998924476491,
            "location": "",
            "context": "BluetoothServerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 8,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 222595,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=61776323e6d5dd2c",
            "url": "https://weblate.appinventor.mit.edu/api/units/222595/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10729/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Button with the ability to detect clicks. Many aspects of its appearance can be changed, as well as whether it is clickable (<code>Enabled</code>), can be changed in the Designer or in the Blocks Editor.",
            "previous_source": "",
            "target": "Button (Knopf) mit der Eigenschaft, \"Klicks\" zu erkennen.  Viele Aspekte seines Aussehens und ob er klickbar ist (<code>Aktiv</code>), können im Designer oder Codeblock-Editor eingestellt werden.",
            "id_hash": 6461992075833696453,
            "content_hash": 8387797218365159273,
            "location": "",
            "context": "ButtonHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 9,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 34,
            "priority": 100,
            "id": 222596,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=d9ad9b8e4d74e0c5",
            "url": "https://weblate.appinventor.mit.edu/api/units/222596/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10730/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A component to record a video using the device''s camcorder.After the video is recorded, the name of the file on the phone containing the clip is available as an argument to the AfterRecording event. The file name can be used, for example, to set the source property of a VideoPlayer component.",
            "previous_source": "",
            "target": "Eine Komponente zur Aufnahme eines Videos über die Kamera des Geräts. Nach erfolgter Aufnahme steht der Name der Datei, die die Aufnahme auf dem Handy enthält, als Argument des NachAufnahne-Ereignis zur Verfügung. Der Dateiname kann zum Beispiel dazu verwendet werden, um die Eigenschaft \"Quelle\" einer VideoPlayer-Komponente zu setzen.",
            "id_hash": -5641026152139572246,
            "content_hash": -472775318287492262,
            "location": "",
            "context": "CamcorderHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 10,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 51,
            "priority": 100,
            "id": 222597,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=31b70c9a21083bea",
            "url": "https://weblate.appinventor.mit.edu/api/units/222597/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10731/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A component to take a picture using the device''s camera. After the picture is taken, the name of the file on the phone containing the picture is available as an argument to the AfterPicture event. The file name can be used, for example, to set the Picture property of an Image component.",
            "previous_source": "",
            "target": "Eine Komponente zur Aufnahme eines Fotos mit der Kamera des Geräts. Nach erfolgter Aufnahme steht der Name der Datei, die das Foto auf dem Handy enthält, als Argument des NachFoto-Ereignis zur Verfügung. Der Dateiname kann zum Beispiel dazu verwendet werden, um die Eigenschaft \"Bild\" einer Bild-Komponente zu setzen.",
            "id_hash": -5308379892507073834,
            "content_hash": -5904074541193820179,
            "location": "",
            "context": "CameraHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 11,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 52,
            "priority": 100,
            "id": 222598,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=3654d89cde4a22d6",
            "url": "https://weblate.appinventor.mit.edu/api/units/222598/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10732/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "<p>A two-dimensional touch-sensitive rectangular panel on which drawing can be done and sprites can be moved.</p> <p>The <code>BackgroundColor</code>, <code>PaintColor</code>, <code>BackgroundImage</code>, <code>Width</code>, and <code>Height</code> of the Canvas can be set in either the Designer or in the Blocks Editor. The <code>Width</code> and <code>Height</code> are measured in pixels and must be positive.</p><p>Any location on the Canvas can be specified as a pair of (X, Y) values, where <ul> <li>X is the number of pixels away from the left edge of the Canvas</li><li>Y is the number of pixels away from the top edge of the Canvas</li></ul>.</p> <p>There are events to tell when and where a Canvas has been touched or a <code>Sprite</code> (<code>ImageSprite</code> or <code>Ball</code>) has been dragged. There are also methods for drawing points, lines, and circles.</p>",
            "previous_source": "",
            "target": "<p>Ein zweidimensionales, berührungsempfindliches, rechteckiges Feld, auf dem gezeichnet und Sprites bewegt werden können.</p> <p>Die <code>Hintergrundfarbe</code>, die <code>Zeichenfarbe</code>, das <code>Hintergrundbild</code>, die <code>Breite</code> und die <code>Höhe</code> der Leinwand können sowohl im Designer, als auch im Codeblock-Editor gesetzt werden. Die <code>Breite</code> und <code>Höhe</code> sind in Pixeln anzugeben und müssen positiv sein.</p> <p>Jede Position auf der Leinwand kann als Koordinatenpaar (X, Y) angegeben werden, wobei <ul> <li>X die Anzahl der Pixel vom linken Rand der Leinwand und</li> und <li>Y die Anzahl der Pixels vom oberen Rand der Leinwand</li></ul> definiert.</p> <p>Es stehen Ereignisse zur Verfügung, die mitteilen, wenn und wo eine Leinwand berührt oder ein <code>Sprite</code> (<code>BildSprite</code> oder <code>Ball</code>) gezogen wurden.  Darüber hinaus stehen Methoden zur Zeichnung von Punkten, Linien und Kreisen zur Verfügung.</p>",
            "id_hash": 1177868880879766378,
            "content_hash": 1721160815748715850,
            "location": "",
            "context": "CanvasHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 12,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 125,
            "priority": 100,
            "id": 222599,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=9058a181acd34b6a",
            "url": "https://weblate.appinventor.mit.edu/api/units/222599/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10733/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A component that holds (x, y)-coordinate based data",
            "previous_source": "",
            "target": "",
            "id_hash": 989492509479085622,
            "content_hash": 2698250035751714163,
            "location": "",
            "context": "ChartData2DHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 13,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "priority": 100,
            "id": 222600,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=8dbb6231df692636",
            "url": "https://weblate.appinventor.mit.edu/api/units/222600/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10734/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A component that allows visualizing data",
            "previous_source": "",
            "target": "",
            "id_hash": 6053375743524776466,
            "content_hash": 3285669990024049936,
            "location": "",
            "context": "ChartHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 14,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 6,
            "priority": 100,
            "id": 222601,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=d401e92aa4c2aa12",
            "url": "https://weblate.appinventor.mit.edu/api/units/222601/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10735/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A Non-visible component for communicating with an AI chat bot. This component currently communicates with a proxy run by MIT which in turn uses OpenAI''s ChatGPT API. This component is considered experimental.",
            "previous_source": "",
            "target": "",
            "id_hash": -3196916305075924341,
            "content_hash": 694122557216736022,
            "location": "",
            "context": "ChatBotHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 15,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 32,
            "priority": 100,
            "id": 222602,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=53a2458efb4b928b",
            "url": "https://weblate.appinventor.mit.edu/api/units/222602/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10736/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Checkbox that raises an event when the user clicks on it. There are many properties affecting its appearance that can be set in the Designer or Blocks Editor.",
            "previous_source": "",
            "target": "Kontrollkästchen (Kästchen zum Setzen von Haken), das ein Ereignis auslöst, wenn der Anwender darauf klickt. Kontrollkästchen haben viele Eigenschaften, die im Designer und Codeblock-Editor gesetzt werden können, die sein Aussehen beeinflussen.",
            "id_hash": 5560284663907163902,
            "content_hash": 7971632595561986638,
            "location": "",
            "context": "CheckBoxHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 16,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 28,
            "priority": 100,
            "id": 222603,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=cd2a1971323d1efe",
            "url": "https://weblate.appinventor.mit.edu/api/units/222603/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10737/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Circle",
            "previous_source": "",
            "target": "",
            "id_hash": -8241033178070520605,
            "content_hash": -5621843235106276343,
            "location": "",
            "context": "CircleHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 17,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 1,
            "priority": 100,
            "id": 222604,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=da1f7fcc6e5ece3",
            "url": "https://weblate.appinventor.mit.edu/api/units/222604/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10738/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "A visible component that indicates the progress of an operation using an animated loop.",
            "previous_source": "",
            "target": "",
            "id_hash": 4018990341327290276,
            "content_hash": 2508060161421114012,
            "location": "",
            "context": "CircularProgressHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 18,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 14,
            "priority": 100,
            "id": 222605,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=b7c6526c0289ffa4",
            "url": "https://weblate.appinventor.mit.edu/api/units/222605/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10739/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "<p>Non-visible component that provides the instant in time using the internal clock on the phone. It can fire a timer at regularly set intervals and perform time calculations, manipulations, and conversions.</p> <p>Methods to convert an instant to text are also available. Acceptable patterns are empty string, MM/DD/YYYY HH:mm:ss a, or MMM d, yyyyHH:mm. The empty string will provide the default format, which is \"MMM d, yyyy HH:mm:ss a\" for FormatDateTime \"MMM d, yyyy\" for FormatDate. To see all possible format, please see <a href=\"https://docs.oracle.com/javase/7/docs/api/java/text/SimpleDateFormat.html\" _target=\"_blank\">here</a>. </p>",
            "previous_source": "",
            "target": "Nicht sichtbare Komponente, die die Uhr das Handays, einen Timer und zeitbezogene Berechnungen bereitstellt.",
            "id_hash": -4868466836496991434,
            "content_hash": -3555294182401965358,
            "location": "",
            "context": "ClockHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 19,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": true,
            "num_words": 86,
            "priority": 100,
            "id": 222606,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=3c6fbb34d9d3bb36",
            "url": "https://weblate.appinventor.mit.edu/api/units/222606/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10740/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/de/?format=api",
            "source": "Non-visible component allowing you to store data on a Internet connected database server (using Redis software). This allows the users of your App to share data with each other. By default data will be stored in a server maintained by MIT, however you can setup and run your own server. Set the \"RedisServer\" property and \"RedisPort\" Property to access your own server.",
            "previous_source": "",
            "target": "",
            "id_hash": 3854779907392159322,
            "content_hash": -521349578889813530,
            "location": "",
            "context": "CloudDBHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": false,
            "position": 20,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 62,
            "priority": 100,
            "id": 222607,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/de/?checksum=b57eede6fb6c3e5a",
            "url": "https://weblate.appinventor.mit.edu/api/units/222607/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10741/?format=api"
        }
    ]
}