Units

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 229,
    "next": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/units/?format=api&page=2",
    "previous": null,
    "results": [
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Non-visible component that can detect shaking and measure acceleration approximately in three dimensions using SI units (m/s<sup>2</sup>). The components are: <ul><li> <strong>xAccel</strong>: 0 when the phone is at rest on a flat surface, positive when the phone is tilted to the right (i.e., its left side is raised), and negative when the phone is tilted to the left (i.e., its right size is raised).</li> <li> <strong>yAccel</strong>: 0 when the phone is at rest on a flat surface, positive when its bottom is raised, and negative when its top is raised. </li> <li> <strong>zAccel</strong>: Equal to -9.8 (earth''s gravity in meters per second per second when the device is at rest parallel to the ground with the display facing up, 0 when perpendicular to the ground, and +9.8 when facing down. The value can also be affected by accelerating it with or against gravity. </li></ul>",
            "previous_source": "",
            "target": "Componente no visible que detecta movimiento y mide aceleración aproximada en tres dimensiones utilizando unidades SI (m/s<sup>2</sup>). Las componentes son: <ul>\n<li> <strong>xAccel</strong>: 0 cuando el dispositivo no está en movimiento en una superficie plana, positivo cuando el dispositivo se inclina hacia la derecha (por ejemplo, cuando la se levanta por la parte izquierda), y negativo cuando el dispositivo se inclina hacia la izquierda (por ejemplo, levantándolo por la parte derecha). </li>\n <li> <strong>yAccel</strong>: 0 cuando el dispositivo se encuentra en una superficie plana (sin movimiento), positivo cuando se levanta la base, y negativo cuando se levanta la parte superior. </li>\n <li> <strong>zAccel</strong>: Tiene el valor de -9.8 (la gravedad de la tierra en metros por segundo) cuando el dispositivo no está en movimiento y paralelo al suelo con la pantalla hacia arriba, 0 cuando el dispositivo está en posición perpendicular al suelo, y +9.8 con la pantalla hacia abajo. Este valor puede verse afectado si se acelera en contra de la gravedad.</li></ul>",
            "id_hash": 6400886998768359893,
            "content_hash": 3305070602576274360,
            "location": "",
            "context": "AccelerometerSensorHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 1,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 144,
            "priority": 100,
            "id": 223046,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=d8d484cfe10119d5",
            "url": "https://weblate.appinventor.mit.edu/api/units/223046/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10722/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A component that can launch an activity using the <code>StartActivity</code> method. <p>Activities that can be launched include:<ul> <li> Starting another App Inventor for Android app. To do so, first find out the <em>class</em> of the other application by downloading the source code and using a file explorer or unzip utility to find a file named \"youngandroidproject/project.properties\". The first line of the file will start with \"main=\" and be followed by the class name; for example, <code>main=com.gmail.Bitdiddle.Ben.HelloPurr.Screen1</code>. (The first components indicate that it was created by Ben.Bitdiddle",
            "previous_source": "",
            "target": "Un componente que puede iniciar una actividad utilizando el método <code>IniciarActividad</code>. <p>Las actividades que se pueden iniciar incluyen:<ul> <li> Iniciar otra aplicación App Inventor para Android. Para hacerlo, primero averigüe la <em>clase</em> de la otra aplicación descargando el código fuente y usando un explorador de archivos o una utilidad de descompresión para encontrar un archivo llamado \"youngandroidproject/project.properties\". La primera línea del archivo comenzará con \"main=\" y será seguida por el nombre de la clase; por ejemplo, <code>main=com.gmail.Bitdiddle.Ben.HelloPurr.Screen1</code>. (Los primeros componentes indican que fue creado por Ben.Bitdiddle",
            "id_hash": -6655185969608387764,
            "content_hash": -7918337812925819732,
            "location": "",
            "context": "ActivityStarterHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 2,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 223047,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=23a4079f0f54134c",
            "url": "https://weblate.appinventor.mit.edu/api/units/223047/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10723/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A component that contains anomaly detection models",
            "previous_source": "",
            "target": "Un componente que contiene modelos de detección de anomalías",
            "id_hash": 7171671276814156282,
            "content_hash": 6844281919820050944,
            "location": "",
            "context": "AnomalyDetectionHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 3,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 7,
            "priority": 100,
            "id": 223048,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=e386e507746141fa",
            "url": "https://weblate.appinventor.mit.edu/api/units/223048/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10724/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "<p>A round ''sprite'' that can be placed on a <code>Canvas</code>, where it can react to touches and drags, interact with other sprites (<code>ImageSprite</code>s and other <code>Ball</code>s) and the edge of the Canvas, and move according to its property values.</p><p>For example, to have a <code>Ball</code> move 4 pixels toward the top of a <code>Canvas</code> every 500 milliseconds (half second), you would set the <code>Speed</code> property to 4 [pixels], the <code>Interval</code> property to 500 [milliseconds], the <code>Heading</code> property to 90 [degrees], and the <code>Enabled</code> property to <code>True</code>.</p><p>The difference between a <code>Ball</code> and an <code>ImageSprite</code> is that the latter can get its appearance from an image file, while a <code>Ball</code>''s appearance can be changed only by varying its <code>PaintColor</code> and <code>Radius</code> properties.</p>",
            "previous_source": "",
            "target": "<p>Un ''sprite'' redondo que se puede colocar en un <code>Lienzo</code>, donde puede reaccionar a toques y arrastres, interactuar con otros sprites (<code>ImagenSprite</code>s y otros <code>Pelota</code>s) y el borde del lienzo, y muévalo según sus valores de propiedad.</p><p>Por ejemplo, para que una <code>Pelota</code> se mueva 4 píxeles hacia en la parte superior de un <code>Lienzo</code> cada 500 milisegundos (medio segundo), establecería la propiedad <code>Velocidad</code> en 4 [píxeles], la propiedad <code>Intervalo</code> en 500 [milisegundos], la propiedad <code>Encabezado</code> a 90 [grados] y la propiedad <code>Activado</code> a <code>Verdadero</code>.</p><p>El La diferencia entre una <code>Pelota</code> y un <code>ImagenSprite</code> es que este último puede obtener su apariencia de un archivo de imagen, mientras que la apariencia de una <code>Pelota</code> puede ser se modifica únicamente variando sus propiedades <code>Color</code> y <code>Radio</code>.</p>",
            "id_hash": 7449823071733847299,
            "content_hash": -6909237758358581611,
            "location": "",
            "context": "BallHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 4,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 119,
            "priority": 100,
            "id": 223049,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=e763169ce6349503",
            "url": "https://weblate.appinventor.mit.edu/api/units/223049/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10725/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Component for using the Barcode Scanner to read a barcode",
            "previous_source": "",
            "target": "Componente para usar el escáner para leer un código de barras",
            "id_hash": 8772586106945962968,
            "content_hash": -5104959584847873566,
            "location": "",
            "context": "BarcodeScannerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 5,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 223050,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=f9be7c95ca0a83d8",
            "url": "https://weblate.appinventor.mit.edu/api/units/223050/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10726/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A sensor component that can measure the ambient air pressure.",
            "previous_source": "",
            "target": "Un componente de sensor que puede medir la presión del aire ambiente.",
            "id_hash": 8488559212697330255,
            "content_hash": 3604034534974326910,
            "location": "",
            "context": "BarometerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 6,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "priority": 100,
            "id": 223051,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=f5cd6ba12fb1a24f",
            "url": "https://weblate.appinventor.mit.edu/api/units/223051/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10727/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Bluetooth client component",
            "previous_source": "",
            "target": "Componente cliente de Bluetooth",
            "id_hash": 6177559951036237980,
            "content_hash": 869985933288712069,
            "location": "",
            "context": "BluetoothClientHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 7,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 223052,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=d5bb1a0b9c31c89c",
            "url": "https://weblate.appinventor.mit.edu/api/units/223052/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10728/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Bluetooth server component",
            "previous_source": "",
            "target": "Componente servidor de Bluetooth",
            "id_hash": -2200180887099417300,
            "content_hash": 5774648998924476491,
            "location": "",
            "context": "BluetoothServerHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 8,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "priority": 100,
            "id": 223053,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=61776323e6d5dd2c",
            "url": "https://weblate.appinventor.mit.edu/api/units/223053/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10729/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Button with the ability to detect clicks. Many aspects of its appearance can be changed, as well as whether it is clickable (<code>Enabled</code>), can be changed in the Designer or in the Blocks Editor.",
            "previous_source": "",
            "target": "Botón con capacidad de detectar clics. Se pueden cambiar muchos aspectos de su apariencia, así como si se puede hacer clic en él (<code>Activado</code>), se puede cambiar en el Diseñador o en el Editor de bloques.",
            "id_hash": 6461992075833696453,
            "content_hash": 8387797218365159273,
            "location": "",
            "context": "ButtonHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 9,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 34,
            "priority": 100,
            "id": 223054,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=d9ad9b8e4d74e0c5",
            "url": "https://weblate.appinventor.mit.edu/api/units/223054/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10730/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A component to record a video using the device''s camcorder.After the video is recorded, the name of the file on the phone containing the clip is available as an argument to the AfterRecording event. The file name can be used, for example, to set the source property of a VideoPlayer component.",
            "previous_source": "",
            "target": "Un componente para grabar vídeos utilizando la cámara del dispositivo. Cuando el vídeo se ha grabado, el nombre del archivo está disponible en el evento DespuesDeGrabación. Este nombre se puede usar, por ejemplo, como propiedad <code>Fuente</code> en el componente <code>ReproductorDeVídeo</code>.",
            "id_hash": -5641026152139572246,
            "content_hash": -472775318287492262,
            "location": "",
            "context": "CamcorderHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 10,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 51,
            "priority": 100,
            "id": 223055,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=31b70c9a21083bea",
            "url": "https://weblate.appinventor.mit.edu/api/units/223055/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10731/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A component to take a picture using the device''s camera. After the picture is taken, the name of the file on the phone containing the picture is available as an argument to the AfterPicture event. The file name can be used, for example, to set the Picture property of an Image component.",
            "previous_source": "",
            "target": "Un componente para tomar fotos utilizando la cámara del dispositivo. El nombre del archivo conteniendo la foto está disponible en el evento DespuesDeFoto. Este nombre se puede usar, por ejemplo, como propiedad <code>Foto</code> en el componente[a] <code>Imagen</code>.",
            "id_hash": -5308379892507073834,
            "content_hash": -5904074541193820179,
            "location": "",
            "context": "CameraHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 11,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 52,
            "priority": 100,
            "id": 223056,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=3654d89cde4a22d6",
            "url": "https://weblate.appinventor.mit.edu/api/units/223056/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10732/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "<p>A two-dimensional touch-sensitive rectangular panel on which drawing can be done and sprites can be moved.</p> <p>The <code>BackgroundColor</code>, <code>PaintColor</code>, <code>BackgroundImage</code>, <code>Width</code>, and <code>Height</code> of the Canvas can be set in either the Designer or in the Blocks Editor. The <code>Width</code> and <code>Height</code> are measured in pixels and must be positive.</p><p>Any location on the Canvas can be specified as a pair of (X, Y) values, where <ul> <li>X is the number of pixels away from the left edge of the Canvas</li><li>Y is the number of pixels away from the top edge of the Canvas</li></ul>.</p> <p>There are events to tell when and where a Canvas has been touched or a <code>Sprite</code> (<code>ImageSprite</code> or <code>Ball</code>) has been dragged. There are also methods for drawing points, lines, and circles.</p>",
            "previous_source": "",
            "target": "<p>Un panel rectangular bidimensional sensible al tacto en el que se pueden dibujar y mover sprites.</p> <p>El <code>ColorDeFondo</code>, <code>ColorDePintura</code>, <code>Imagen de fondo</code>, <code>Ancho</code> y <code>Alto</code> del lienzo se pueden configurar en el Diseñador o en el Editor de bloques. El <code>Ancho</code> y el <code>Alto</code> se miden en píxeles y deben ser positivos.</p><p>Cualquier ubicación en el lienzo se puede especificar como un par de valores (X, Y ), donde <ul> <li>X es el número de píxeles alejados del borde izquierdo del lienzo</li><li>Y es el número de píxeles alejados del borde superior del lienzo</li></ul>.</p> <p>Hay eventos para saber cuándo y dónde se ha tocado un Lienzo o un <code>Sprite</code> (<code>ImagenSprite</code> o <code>Pelota</code>) ha sido arrastrado. También existen métodos para dibujar puntos, líneas y círculos.</p>",
            "id_hash": 1177868880879766378,
            "content_hash": 1721160815748715850,
            "location": "",
            "context": "CanvasHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 12,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 125,
            "priority": 100,
            "id": 223057,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=9058a181acd34b6a",
            "url": "https://weblate.appinventor.mit.edu/api/units/223057/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10733/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A component that holds (x, y)-coordinate based data",
            "previous_source": "",
            "target": "Un componente que contiene datos basados en coordenadas (x, y)",
            "id_hash": 989492509479085622,
            "content_hash": 2698250035751714163,
            "location": "",
            "context": "ChartData2DHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 13,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "priority": 100,
            "id": 223058,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=8dbb6231df692636",
            "url": "https://weblate.appinventor.mit.edu/api/units/223058/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10734/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A component that allows visualizing data",
            "previous_source": "",
            "target": "Un componente que permite visualizar datos",
            "id_hash": 6053375743524776466,
            "content_hash": 3285669990024049936,
            "location": "",
            "context": "ChartHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 14,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 6,
            "priority": 100,
            "id": 223059,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=d401e92aa4c2aa12",
            "url": "https://weblate.appinventor.mit.edu/api/units/223059/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10735/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A Non-visible component for communicating with an AI chat bot. This component currently communicates with a proxy run by MIT which in turn uses OpenAI''s ChatGPT API. This component is considered experimental.",
            "previous_source": "",
            "target": "Un componente no visible para comunicarse con un chatbot de IA. Este componente actualmente se comunica con un proxy ejecutado por el MIT que a su vez utiliza la API ChatGPT de OpenAI. Este componente se considera experimental.",
            "id_hash": -3196916305075924341,
            "content_hash": 694122557216736022,
            "location": "",
            "context": "ChatBotHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 15,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 32,
            "priority": 100,
            "id": 223060,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=53a2458efb4b928b",
            "url": "https://weblate.appinventor.mit.edu/api/units/223060/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10736/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Checkbox that raises an event when the user clicks on it. There are many properties affecting its appearance that can be set in the Designer or Blocks Editor.",
            "previous_source": "",
            "target": "CasillaDeVerificación que activa un evento cuando se hace clic en ella. Existen muchas propiedades para definir su aspecto, que pueden gestionarse desde el Diseñador o el Editor de Bloques.",
            "id_hash": 5560284663907163902,
            "content_hash": 7971632595561986638,
            "location": "",
            "context": "CheckBoxHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 16,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 28,
            "priority": 100,
            "id": 223061,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=cd2a1971323d1efe",
            "url": "https://weblate.appinventor.mit.edu/api/units/223061/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10737/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Circle",
            "previous_source": "",
            "target": "Círculo",
            "id_hash": -8241033178070520605,
            "content_hash": -5621843235106276343,
            "location": "",
            "context": "CircleHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 17,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 1,
            "priority": 100,
            "id": 223062,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=da1f7fcc6e5ece3",
            "url": "https://weblate.appinventor.mit.edu/api/units/223062/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10738/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "A visible component that indicates the progress of an operation using an animated loop.",
            "previous_source": "",
            "target": "Un componente visible que indica el progreso de una operación mediante un bucle animado.",
            "id_hash": 4018990341327290276,
            "content_hash": 2508060161421114012,
            "location": "",
            "context": "CircularProgressHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 18,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 14,
            "priority": 100,
            "id": 223063,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=b7c6526c0289ffa4",
            "url": "https://weblate.appinventor.mit.edu/api/units/223063/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10739/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "<p>Non-visible component that provides the instant in time using the internal clock on the phone. It can fire a timer at regularly set intervals and perform time calculations, manipulations, and conversions.</p> <p>Methods to convert an instant to text are also available. Acceptable patterns are empty string, MM/DD/YYYY HH:mm:ss a, or MMM d, yyyyHH:mm. The empty string will provide the default format, which is \"MMM d, yyyy HH:mm:ss a\" for FormatDateTime \"MMM d, yyyy\" for FormatDate. To see all possible format, please see <a href=\"https://docs.oracle.com/javase/7/docs/api/java/text/SimpleDateFormat.html\" _target=\"_blank\">here</a>. </p>",
            "previous_source": "",
            "target": "<p>Componente no visible que proporciona el instante en el tiempo mediante el reloj interno del teléfono. Puede activar un temporizador a intervalos establecidos regularmente y realizar cálculos de tiempo, manipulaciones y conversiones.</p> <p>También hay disponibles métodos para convertir un instante en texto. Los patrones aceptables son cadenas vacías, MM/DD/AAAA HH:mm:ss a, o MMM d, yyyyHH:mm. La cadena vacía proporcionará el formato predeterminado, que es \"MMM d, yyyy HH:mm:ss a\" para FormatoFechaHora \"MMM d, yyyy\" para FormatoFecha. Para ver todos los formatos posibles, consulte <a href=\"https://docs.oracle.com/javase/7/docs/api/java/text/SimpleDateFormat.html\" _target=\"_blank\">aquí</a> . </p>",
            "id_hash": -4868466836496991434,
            "content_hash": -3555294182401965358,
            "location": "",
            "context": "ClockHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 19,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 86,
            "priority": 100,
            "id": 223064,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=3c6fbb34d9d3bb36",
            "url": "https://weblate.appinventor.mit.edu/api/units/223064/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10740/?format=api"
        },
        {
            "translation": "https://weblate.appinventor.mit.edu/api/translations/appinventor/component-info/es/?format=api",
            "source": "Non-visible component allowing you to store data on a Internet connected database server (using Redis software). This allows the users of your App to share data with each other. By default data will be stored in a server maintained by MIT, however you can setup and run your own server. Set the \"RedisServer\" property and \"RedisPort\" Property to access your own server.",
            "previous_source": "",
            "target": "Componente no visible que le permite almacenar datos en un servidor de base de datos conectado a Internet (utilizando el software Redis). Esto permite a los usuarios de su aplicación compartir datos entre sí. De forma predeterminada, los datos se almacenarán en un servidor mantenido por el MIT; sin embargo, usted puede configurar y ejecutar su propio servidor. Configure la propiedad \"ServidorRedis\" y la propiedad \"PuertoRedis\" para acceder a su propio servidor.",
            "id_hash": 3854779907392159322,
            "content_hash": -521349578889813530,
            "location": "",
            "context": "CloudDBHelpStringComponentPallette",
            "comment": "",
            "flags": "",
            "fuzzy": false,
            "translated": true,
            "position": 20,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 62,
            "priority": 100,
            "id": 223065,
            "web_url": "https://weblate.appinventor.mit.edu/translate/appinventor/component-info/es/?checksum=b57eede6fb6c3e5a",
            "url": "https://weblate.appinventor.mit.edu/api/units/223065/?format=api",
            "source_info": "https://weblate.appinventor.mit.edu/api/sources/10741/?format=api"
        }
    ]
}